#KOTION EACH G9000 MIC IS QUIET PORTABLE#
#KOTION EACH G9000 MIC IS QUIET ANDROID#

In general, to listen to music with a level of 90 dB SPL in a quiet environment, the amplifier will require a voltage of -24.5 dBV.

#KOTION EACH G9000 MIC IS QUIET ANDROID#

There may be specific audible distortions in Android OS devices.

It is possible to take a big step in changing the volume levels in the low volume area with a digital adjustment or a discrete controller on the relay.

The problem can be solved by the presence of separate preamp settings Hi and Low.

Channel imbalance is possible with analog volume control in the minimum area.

The source is desirable to choose the best value of the signal/noise.

An audible background noise source is likely.

Some devices designed for over-ear headphones may be too loud for the Kotion Each G9000. It is necessary to carefully choose the source for these headphones. These headphones are 11.1 dB louder than most Over-ear headphones.This difference is more a threefold deviation from the mean. The Kotion Each G9000 sensitivity is 123.5 dB/V SPL. The average value of sensitivity by voltage for Over-ear headphones by measured 557 models is 112.4 dB/V SPL. Similarly will be with the sound from the headphones, which are lacked the current from the amplifier.ДЇor a quiet environment, an amplifier with an output current level of at least 3.99 mA in a given class of quality is desirable (preferably orientated to comparable class A) and 15.88 mA for loud. If the inflow of water in the tank is lower than the volume that the pump pumps out, then at the pump outlet we collect water and 'bubbles'. The voltage from the amplifier this is the pressure with which the pump draws water from the reservoir. Imagine that you have a water tank, which gradually fills with water. In most cases, at low current values, the amplifiers operate in comparable quality to class A, and as the current level rises, the quality decreases toward AB, B, and the clipping zone. If the current is not enough, the sound quality will deteriorate, beginning with harsh in the sound and ending with a crackling. The resistance affects the amount of current that the amplifier should give to the headphones.

The average resistance at the headphones Kotion Each G9000 is 26.56 Ohm. An amplifier with a level above 18.51 dBV is not desirable if the volume control is digital, not analog.ДЇor noisy environments, an amplifier with a voltage level of at least -7.50 dBV at a load of 26.56 ohms is desirable. In a quiet environment for the Kotion Each G9000, an amplifier with a voltage level of at least -19.50 dBV at 27 Ohms is recommended for listening to music with a level of 90 dB SPL (without noise isolation). If source power is weak, there will be insufficient volume level. If the source is too powerful, then there is a high probability of constantly hearing background noise.

#KOTION EACH G9000 MIC IS QUIET PORTABLE#

High sensitivity of the headphones means less energy need from the source (for portable devices - less power from the battery).Дepending on the sensitivity, headphones are best to use with sources of optimum power. The sensitivity by power reflects the efficiency of the headphones. The sensitivity by voltage reflects the relative 'loudness' of the headphones among others - the higher is the value, the louder are the headphones. The sensitivity of the Kotion Each G9000 headphones is 123.50 dB/V SPL by the voltage and 107.74 dB/mW SPL by the power. Recording a voice or instrument in the studio Mid-power sources 6dBV/30dB(mA), S/N 120 dB: Office and home, where people should not hear the sound from the headphones Home or studio, where sound from the headphones does not bother anyone Low-power sources -18dBV/6dB(mA), S/N 105 dB: (to which the headphones will be connected) Analysis and recommendations for Kotion Each G9000 based on the measured characteristics

Kotion each g9000 mic is quiet